A beverage filling line CIP specification starts with a drawing of the surfaces to be cleaned. The words “CIP included” do not say whether the product tank, transfer pipe, filler bowl, filling valves and return line form one cleanable route. Before comparing quotations, define each circuit, the residues it must remove, the controls it needs and the evidence that will show the installed process works.

Map every product-contact path
Mark the product route from preparation and storage to the filler outlet. For each tank, pipe, pump, valve and filling manifold, ask whether cleaning solution reaches the wetted surfaces, where it returns and how the circuit drains. Include branches used only for a particular recipe or package format. A closed valve or bypass can leave a section outside the intended path, even when the main loop circulates.
List surfaces that require a separate method. Some removable parts, exterior machine surfaces, cap-handling areas and open conveyors may need manual cleaning or a different documented procedure. A claim that a machine is cleanable in place should identify the exact included surfaces. EHEDG’s certification FAQ makes this distinction for certified closed components: its in-place cleanability assessment covers internal wetted parts, not the motor, frame or actuator.
Match the method to the beverage and the equipment
Water, sweetened drinks, juice and products with protein or pulp leave different soils. The cleaning program should be developed from the actual product, production schedule, material compatibility and hygiene objective. Specify the required cleaning media, flow path, temperature and concentration monitoring where relevant, contact-time logic and rinse endpoint. The validated values belong in the plant’s cleaning procedure and the supplier’s project documents; copying a generic recipe into an equipment order gives false precision. For hot-filled juice, U TECH’s juice hot-filling guide covers the surrounding process and equipment decisions; the cleaning circuit still needs its own documented boundary.
Cleaning removes soil. Sanitizing or another microbial-control step addresses a different objective and may be required by the plant’s food-safety plan. The two need separate acceptance criteria. For a US food facility, 21 CFR 117.35 requires food-contact surfaces to be cleaned as frequently as necessary to protect against allergen cross-contact and contamination. Projects in other markets must use their applicable requirements and the product’s own hazard analysis.

Specify flow, return and control points
A CIP skid cannot clean a surface that its circuit bypasses or fails to wet. Ask for a piping and instrumentation diagram that shows supply, return, drain and any recovery route. It should identify pumps, valves, instruments and the machine states required before a cleaning recipe starts. If the filler needs temporary cups or other parts to close its outlet during CIP, name their supply and operating procedure in the scope.
The control description should show how the system confirms that the intended circuit is selected and how it responds to loss of flow, insufficient heating where heating is required, chemical dosing faults or an unsafe valve state. Record which measurements the operator can review after a cycle. A completed timer by itself says little about whether the necessary cleaning conditions reached the difficult part of the line. Tetra Pak’s CIP unit description lists time, concentration, temperature and flow as adjustable cleaning conditions; the actual targets must be set for the application.

Put the boundary into the RFQ
| RFQ item | Question for the supplier | Evidence to request |
|---|---|---|
| Circuit scope | Which product-contact surfaces are cleaned by each route? | Marked flow diagram and equipment list |
| Supply and return | Where do media enter, circulate, return and drain? | Piping and instrumentation diagram |
| Manual work | Which parts require removal or external cleaning? | Written cleaning boundary and access plan |
| Monitoring | Which conditions are measured, recorded and alarmed? | Instrument list and control description |
| Materials | Are wetted components and seals compatible with the agreed media? | Material and seal schedule |
| Acceptance | What can be demonstrated at the factory and on the installed line? | FAT/SAT plan and responsibility matrix |
These questions make quotations comparable. One proposal may include only a connection point for an existing plant CIP system; another may include tanks, pumps and controls. The purchase scope should state which one is being offered and who connects it to the filler.
Test the functions, then validate the cleaning result
At a factory acceptance test, the parties can check assembled flow paths, valve sequencing, alarms, instrument signals, drainage and the documented recipe functions within the available setup. Site testing checks the installed piping, utilities and product-contact route. The beverage filling line FAT checklist provides a record structure for witnessed factory functions and site-only items. The food producer then validates that the selected cleaning method achieves its defined hygiene result on the actual product and line, and verifies that routine cycles continue to meet it. EHEDG’s test-methods page says equipment cleanability tests do not establish performance in every application; the food manufacturer develops a suitable process-specific cleaning regime.
U TECH’s juice/energy drink/tea line page lists CIP in its blending-system scope, and its carbonated-drink line page lists CIP among possible process systems. When requesting a line proposal, send the intended beverages, changeover plan and cleaning-circuit table. Ask U TECH to identify the CIP equipment, connections and test evidence included in that specific offer.
Frequently asked questions
Is a CIP connection enough to call a filler CIP capable?
The connection shows where cleaning media may enter. The full route still needs to show that the intended product-contact surfaces receive and release the media under the agreed conditions. Request a circuit drawing and a test method for the proposed configuration.
Does CIP clean exterior conveyors and cap-handling equipment?
The CIP scope is defined by its documented circuits. Exterior conveyors, caps and open handling surfaces often require separate procedures. List these boundaries in the plant sanitation plan and supplier scope.
Can one cleaning recipe be used for water and juice?
The recipe must be assessed against the actual soils, product risks, materials and changeover schedule. Do not assume that a program demonstrated on water covers a sweetened or pulpy beverage. Establish and validate the conditions for each required duty.
What proves that an installed CIP system works?
Use two kinds of evidence: records showing the cycle reached its specified conditions and validation results showing that the cleaned equipment meets the plant’s defined hygiene outcome. Routine verification then checks continued performance. The sampling and acceptance method must follow the product and site food-safety plan.